EGIDE développe des intercepteurs électriques et la plateforme logicielle Mystique pour la défense. Ses systèmes visent à contrer les drones et munitions à bas coût avec des solutions adaptables et produites à grande échelle.
Electronics Engineer – Design to Production
EGIDE recherche un Electronics Engineer senior pour concevoir et industrialiser des cartes électroniques embarquées et critiques pour la sécurité, de l’architecture à la production en série. Le poste est basé à Paris, à temps plein, avec un rôle axé sur le design-to-cost, la fabrication automatisée, la validation et le suivi de production.
3× plus de chances d’entretien avec un cold email
Voir l’offre originaleRepères sur EGIDE
- Type d’entreprise
- Financée par du capital-risque
- Stade
- Startup early-stage
- Domaine officiel
- egide-tech.com
- Création
- 2025 · 1 an
- Effectif public
- 15 employés
- Financement total publié
- 9,2 M$Source ↗
- Dernière levée
- Seed · 2026-03-23
- Montant annoncé
- 8 000 000 €
- Offres ouvertes
- 7
Investisseurs mentionnés
Détails de l’offre
La description complète publiée par EGIDE.
Description de l’offre
Embedded & Safety-Critical Boards – Low-Cost, High-Volume Industrialization 📍 Location: Paris Region (on-site) 🛰️ Sector: Next-gen European Defense 💼 Type: Full-time, Permanent 📈 Seniority: Senior (5y+) 💰 Compensation: Competitive Salary + Equity + Full Health Coverage About EGIDE EGIDE is building a new European defense leader focused on scalable, intelligent air-defense architectures. We develop mass-use interceptors designed to neutralize low-cost, high-volume threats such as Shahed-type loitering munitions and FPV drones.
Our systems combine missile-grade lethality with modern software-defined architectures and electrically propelled interceptors, enabling a new class of cost-effective and rapidly deployable air defense solutions. We are assembling a world-class engineering team to design, test, and industrialize these systems at pace. About the Role Countering mass threats requires mass-produced effectors.
As an Electronics Engineer , you will lead, directly or through design subcontractors under your technical authority, the design and industrialization of the electronic boards of our weapon systems, from embedded computing and power electronics to safety-critical functions. Your core mission is to make these boards manufacturable at large scale and low cost without compromising safety: design-to-cost from the first schematic, design for automated manufacturing and test, supply chain robustness, and a production ramp-up driven by yield, quality and unit cost.
You will cover the full lifecycle, from architecture and specification through to the definition ofmanufacturing methods and processes, production follow-up and board acceptance. You will workclosely with the Munition Safety Engineer, the embedded software team and our manufacturing partners.
What You’ll Do
- Design and lead the design of a standardized family of embedded boards (processing, power, interfaces, safety functions) with a design-to-cost approach: BOM cost targets, part count reduction, reuse of common building blocks across products.
- Select components for cost, availability and volume: COTS, industrial and automotive-grade parts (AEC-Q100 / Q200), multi-sourcing and European or ITAR-free supply options, lifecycle and obsolescence risk · Implement safety logic by design on safety-critical boards and contribute to dependability analyses (FMECA, FTA, reliability, SPF) with the Munition Safety Engineer
- Drive design for high-volume manufacturing:
- DFM / DFA: full SMT, reflow-compatible assemblies, panelization, minimal manual operations, selective coating
- DFT: test coverage strategy, boundary scan (JTAG), in-line programming, AOI / X-ray, ICT or flying probe, automated functional testing
- Traceability: serialization, production data collection, configuration management
- Define manufacturing methods and processes: process specifications, control plans, PFMEA, production test benches, ESS / burn-in strategy sized for volume, manufacturing and inspection files
- Select and manage EMS partners: RFQs and cost breakdowns, capacity assessment, second sourcing, NRE and tooling, transfer to production
- Lead the ramp-up from prototypes to pre-series and series: First Article Inspection (FAI), production acceptance, yield (FPY) and SPC monitoring, non-conformance handling and root cause analysis (8D)
- Run continuous cost-down and value engineering on released boards, including qualification by similarity for component changes
- Plan and execute validation and qualification (functional, EMC / E3, environmental) in line with applicable standards (MIL-STD-461 / 464, MIL-STD-810, IPC Class 3 or equivalents); participate in design reviews (PDR, CDR, PRR)
- Produce and maintain the board definition package: specifications, design documentation, ICDs, test and acceptance procedures (ATP) You Are a Fit If You Have
- Engineering degree (electronics, electrical engineering, embedded systems or equivalent)
- 5+ years of experience in electronic board design and industrialization, including at least one product brought to high-volume production (automotive, industrial, consumer, telecom or defense)
- Proven design-to-cost track record: BOM optimization, component standardization, cost-down programs
- Strong DFM / DFA / DFT practice and knowledge of SMT assembly processes and IPC standards (IPC-A-610, J-STD-001, IPC-2221 or equivalent)
- Experience managing EMS subcontractors from RFQ to series production, including FAI, yield improvement and production acceptance
- Command of industrial quality tools: PFMEA, control plans, SPC, 8D, lean manufacturing
- Hands-on multi-layer PCB design experience and associated ECAD tools (Altium Designer, Cadence, KiCad or equivalent)
- Exposure to safety-critical electronics (defense, aerospace, automotive ISO 26262, rail or IEC 61508)
- Lab expertise in bring-up, debugging and validation; understanding of EMI / EMC constraints
- Ability to write structured engineering documentation and to steer subcontracted design work
- Systems engineering mindset and ability to work across multidisciplinary interfaces (safety,
- software, mechanics, production, purchasing)
Nice to Have
Automotive industrialization background (IATF 16949, PPAP, AEC-Q qualified components)
- Experience with boundary scan and automated test equipment (Python, LabVIEW, TestStand)
- Embedded computing board design (MCU, SoC, FPGA) and supply chain risk management for these components
- Knowledge of munition safety standards (STANAG 4187, MIL-STD-1316) and defense qualification processes
- Previous experience in a start-up or fast-scaling hardware company
- Active security clearance or eligibility to obtain one Why Join EGIDE?
- W ork on next-generation weapon systems addressing real-world, high-intensity threats
- Own power and control electronics end to end, from watts to tens of kilowatts, from first
- schematic to production-ready design
- Competitive salary + meaningful equity
- 100% health coverage
- High-autonomy, engineering-driven culture with direct impact on system performance and cost
- Concrete contribution to European strategic autonomy
Recruitment Process
- First phone / video call screening
- Technical deep dive
- Case study
- On-site final meeting
Prérequis
- Engineering degree
- Electronic board design and industrialization
- High-volume production experience
- DFM / DFA / DFT
- SMT assembly processes
- EMS subcontractor management
- Multi-layer PCB design
- EMI / EMC validation
Avantages mentionnés
- Equity
- Full health coverage
Candidater à cette offre
Comment candidater ?
L’offre est publiée sur le site de EGIDE. Ouvrez l’offre originale ↗ pour y déposer votre candidature. Screeningpass ne remplit pas de formulaire à votre place.
À qui écrire chez EGIDE pour ce poste ?
Lancez une recherche de contact depuis cette page. Screeningpass vous propose jusqu’à trois personnes liées au poste. Vous choisissez celle à qui écrire, puis Screeningpass cherche son email professionnel et prépare un message. Vous le relisez et l’envoyez vous-même avec Gmail. Une adresse email n’est pas toujours disponible, et une réponse n’est jamais garantie.
Combien coûte la recherche d’un contact ?
Une recherche coûte 1 crédit. Le crédit vous est rendu si la recherche échoue. L’inscription offre 3 crédits, soit 3 recherches.
À quoi sert Screeningpass ?
Screeningpass rassemble des offres de stage, d’alternance et d’emploi publiées par les entreprises. Pour une offre, Screeningpass trouve une personne à contacter dans l’entreprise, cherche son email professionnel et prépare un message à partir de votre CV. Voir le fonctionnement en détail.